Interpipe Inc. is a steel pipe distributor of new
and used structural steel pipe. We have several
large stocking locations of Seamless, ERW,
Spiralweld and DSAW pipe.
2" OD–48" OD in a variety of wall thicknesses
are stocked in all locations.
Piling Pipe 80,000 min yield seamless pipe for
Micro Piling.
Seamless and ERW pipe for Driven Piles,
Screw Piles and Drill Piles.
Large Diameter pipe for Driven Piles or
Caissons.
ONTARIO
3320 Miles Road, RR#3
Mount Hope, Ontario
L0R 1WO
Local: (905) 679-6999
Toll Free: (877) 468-7473
Fax: (905) 679-6544
QUEBEC
805 1 ère Avenue
Ville Ste. Catherine, Quebec
J5C 1C5
Local: (450) 638-3320
Toll Free: (888) 514-0040
Fax: (450) 638-3340
www.interpipe.com
“We built a long section of combi wall that ran about 150
metres east-west along the Keating Channel,” said Mike Van
Impe, project manager with SB Canada. “Then the combi wall
turned southerly and continued for another 45 metres until it
tied into an existing quay.”
Van Impe explains that the combi wall was made up of
rock socketed hollow pipes laced with sheet piles and tieback
rock anchors. Several suppliers delivered these materials:
Pipe & Piling Supplies Ltd., a major producer and supplier
of steel pipe across North America, and Samuel Roll Form
Group, manufacturing steel roll form products for more than
45 years; both provided a steady, reliable source of material.
“One of the more complex things about this project was
that rock anchor tiebacks were utilized to ensure plumbness
during and after backfilling operations. The rock anchors,
which were installed from marine plant, had an outward
batter and a socket depth of up to 8.5 metres, and required a
massive amount of air to lift the drill spoils. The rock anchor
casings were drilled in a single stroke using a down-the-hole
hammer and a Berminghammer BHD-40 hydraulic drill
mounted to a custom vertical travel lead supported by a 165
tonne crane.
“Contech Systems supplied all the rock anchoring material,
and in conjunction with the pipe piles, the sheet piles and the
rock anchors, we ended up with a very robust system.”
Bermingham’s internal engineering department designed
and manufactured a custom steel template that would ensure
the proper location of the wall. The custom template solution
utilized the existing dock wall to keep everything aligned.
COMPANY PROFILE
18 Q2 2019 www.pilingcanada.ca
/www.interpipe.com
/www.pilingcanada.ca
